In a nutshell, ’Green Energy’ utilises natural resources such as sunlight, wind, tides and geothermal heat to provide our daily energy requirement. They are considered ’Green’ because they are environmentally friendly. It is easy to think that we may be travelling back in time when we think of items such as wind power and windmills. However, it is the result of eco-efficient and planet friendly options that this process is maintained.

It is the use of simple renewable energies such as Solar Thermal and Solar Water Heating Collectors, that suits the home environment. It is equipment such as Photovoltaic Panels (PV’s) that develop electricity through suitable roof-panels. Biomass Energy is the next phase, and this involves Fuel, Pellets, Stoves and Boilers burning Wood. Of course, then there is the heating from the Sun – often just called Ground Source Heat Pumps. When we think about Wind Power and Hydropower we have two of the more common forms of energy generation.

Thermal Solar Energy – Typically referred to as Solar Energy this is mainly made up of two types of Solar Panels – each using different methods to achieve similar results. To begin with, we have the concept of drawing energy from the Sun to heat water – known as Solar Water Heating Collectors. Secondly, Photovoltaic heat collectors – often simply referred to as Solar Electrical Panels – which transform the solar radiation into electricity. Obviously situated away from blockages such as chimneys etc., these Solar Panels need to be mounted on south facing roofs at an angle of 30 degrees from the horizontal.

For the UK, this is often considered the most popular form of ’Green Energy’. Solar Water heating systems can meet the need for more than half of all hot water needs in the domestic market. Getting a professional fitting will cost around 2-5k, however, doing the job yourself could make it as low as 500 to 1500 pounds in total.

Biomass Energy Based Systems: This is a general term for all forms of plant and animal material e.g. wood, straw, poultry litter and ’energy crops’. It’s the ability of this power source to generate diverse forms of energy, such as heat and electricity, that makes this so adaptable. The ability to generate electricity is one of the UK’s main green strengths – as it has one of the larger Biomass legacies within Europe. Added to all this, is the lack of C02 produced as a by-product of the whole process. Having a tree planted in place of another (that is felled for energy production) helps overall.

By the growth of Short Rotation Crops (SRC), the UK is able to maximise the ’Energy Crops’ return overall. Of equal importance is the ability to produce dry matter – and perennial grasses are very good for this. Of equal importance, although maybe less well known, are Municipal and Agricultural Waste. One natural offshoot of agricultural work is Agricultural Waste. Because it comes from food or wood, Municipal Waste is also considered a useful biomass product.

Geo-Thermal Energy Systems… This is primarily the heating of the Earth (mainly from the sun) and can be utilised in electricity and warm water production. Heating or cooling properties in the UK can be achieved using the ground source heat temperature of around 12 degrees centigrade. Whilst these heat pumps require energy to operate, their rate of return is excellent – being four units produced for every one unit used. Heat source pump energy can go one step further (by gaining a 100 percent return) if the energy to power them comes from items such as wind turbines or solar electrical panels.

Wind Energy Programs: In use for milling grain or pumping water, wind energy has been with us for a very long time, although its modern uses are complex. However, in more recent times there’s been the option to recover the energy for its own sake – and deliver this either to a home unit or to the local power grid. The UK is considered as one of the best sources of wind generation within Europe. Potentially, we can produce 10 percent of our annual energy needs through wind power, although at present within the UK we still only use 1 percent. Frankly, electricity can be realised from as little as 2p per kWh – as opposed to the current level of 2-10 p per kWh. Recovery of the cost involved is somewhere between 6-9 months.

Last of all there is Hydropower – an area of especial importance to the UK. Having said that, the art of using energy from moving water (just like wind power) is very traditional. Within the UK, this form of energy production is responsible for somewhere in the region of 2 percent of all electrical needs.

By using a turbine, a Hydropower system can transfer the kinetic energy of moving water into another form. Turbines use either a water drop (e.g. through a dam) or by a natural ’run of the river’ – thereby having no water storage reservoir. ’Micro-Hydro’ however utilises old outdated sluices and dams. Although a lesser known form of electricity output, this process could supply 200mW of UK demand. The expected cost of installing a system such as this would be between 200 pounds and 3k per kW of output.

’Green Energy’ is growing – mainly due to the demands of the Western World. To be fair, the UK domestic market is actually leading the resurgence, with a variety of schemes.

Electrician and Plumbers are thought to be key in providing expertise during domestic installations. It is the political view of this type of energy generation that results in grants and financial aid becoming ever-more prevalent. Gaining installation certification across these areas can only provide further opportunity and job security to anyone already in related fields or looking to retrain. To cover both ends, you could consider electrical or plumbing training along with green systems.

(C) S. Edwards 2009. Check out Renewable Energy Certification or Green Engineer Certification.